e Govt Job Alert: Latest Exam Syllabus in pdf, Exam Pattern/ Scheme, Eligibility Criteria, Exam Dates/ Schedules,Answer Key, Cut Off Marks, Admit Cards, Exam Hall ticket, Interview Call Letter,Exam Notification 2015-2016, Recruitment/ Rozgar Samachar/ Employment News, Results, Merit List, Toppers List, Rank List, Previous Year Old Question Papers, Exam tips & guides,

Wednesday, 14 October 2015

TSPSC AEE Mechanical Syllabus 2015 Exam Pattern

TSPSC Assistant Engineer Syllabus 2015 TSPSC AEE Syllabus 2015 in pdf Telangana PSC Assistant Executive Engineer Exam Pattern 2015 TSPSC AEE Exam Syllabus for Civil Mechanical Engineering
TSPSC AEE Exam Syllabus 2015
Telangana State Public Service Commission (TSPSC) will conduct a written examination for the recruitment to the posts of Assistant Executive Engineer in Civil/ Mechanical Engineering. Candidates who are going to participate in this written test can get the syllabus and exam pattern from hereunder.
Exam Pattern : Exam Pattern for the AEE (Civil) written Exam is as Follows:-
PaperSubjectQuestionsMarksTime Duration
Paper – IGeneral Studies & General Abilities15015002:30 Hrs.
Paper – IIEngineering15030002:30 Hrs.
► The written exam will be multiple choice objective type.
► There will also be a Interview of 50 marks.
Exam Syllabus : Exam Syllabus for Telangana PSC AEE Exam is given below :-
Paper-I: GENERAL STUDIES AND GENERAL ABILITIES
  1. Current affairs – Regional, National and International.
  2. International Affairs.
  3. General Science; India’s Achievements in Science and Technology.
  4. Environmental issues; Disaster Management- Prevention and Mitigation Strategies.
  5. Economic and Social Development of India and Telangana.
  6. Physical, Social and Economic Geography of India.
  7. Physical, Social and Economic Geography and Demography of Telangana.
  8. Socio-economic, Political and Cultural History of Modern India with special emphasis on Indian National Movement.
  9. Socio-economic, Political and Cultural History of Telangana with special emphasis on Telangana Statehood Movement and formation of Telangana state.
  10. Indian Constitution; Indian Political System; Governance and Public Policy.
  11. Social  Exclusion;  Rights  issues  such  as  Gender, Caste,  Tribe,  Disability  etc.  and inclusive policies.
  12. Society, Culture, Heritage, Literature of Telangana.
  13. Policies of Telangana State.
  14. Logical Reasoning; Analytical Ability and Data Interpretation.
  15. Basic English. (10thclass Standard)
PAPER-II: MECHANICAL ENGINEERING (DEGREE LEVEL)
Section I: Applied Mechanics and Design
  1. Engineering Mechanics: Free-body diagrams and equilibrium; trusses and frames; virtual work; kinematics and dynamics of particles and of rigid bodies in plane motion; impulse and momentum (linear and angular) and energy formulations, collisions.
  2. Mechanics of Materials: Stress and strain, elastic constants, Poisson’s ratio; Mohr’scircle for plane stress and plane strain; thin cylinders; shear force and bending moment diagrams; bending and shear stresses; deflection  of beams; torsion of circular shafts; Euler’s theory of columns; energy methods; thermal stresses; strain gauges and rosettes; testing of materials with universal testing machine; testing of hardness and impact strength.
  3. Theory of Machines: Displacement, velocity and acceleration analysis of plane mechanisms; dynamic analysis of linkages; cams; gears and gear trains; flywheels and governors; balancing of reciprocating and rotating masses; gyroscope.
  4. Vibrations: Free and forced vibration of single degree of freedom systems, effect of damping; vibration isolation; resonance; critical speeds of shafts.
  5. Machine Design: Design for static and dynamic loading; failure theories; fatigue strength and the S-N diagram; principles of the design of machine elements such as bolted, riveted and welded joints, keys, shafts, gears, rolling and sliding contact bearings, brakes and clutches, springs.
Section II: Fluid Mechanics and Thermal Sciences
  1. Fluid Mechanics: Fluid properties; fluid statics, manometry, buoyancy, forces on submerged  bodies, stability of floating bodies; control-volume analysis of mass, momentum and energy; fluid acceleration; differential equations of continuity and momentum; Bernoulli’s equation; dimensional analysis; viscous flow of incompressible fluids, boundary layer, elementary turbulent flow, flow through pipes, head losses in pipes, bends and fittings.
  2. Heat-Transfer: Modes of heat transfer; one dimensional heat conduction, resistance concept and electrical analogy, heat transfer through fins; unsteady heat conduction, lumped parameter system, thermal boundary layer, dimensionless parameters in free and forced convective heat transfer, heat transfer correlations for flow over flat plates and through pipes, effect of turbulence; heat exchanger performance, LMTD and NTU methods; radiative heat transfer, Stefan-Boltzmann law, Wien’s displacement law, black and grey surfaces, view factors, radiation network analysis.
  3. Thermodynamics: Thermodynamic systems and processes; properties of pure substances, behavior of ideal and real gases; zeroth and first laws of thermodynamics, calculation of work and heat in various processes; second law of thermodynamics; availability and irreversibility; thermodynamic relations.
  4. Power Engineering: Air compressors; vapour and gas power cycles, concepts of regeneration and reheat.
  5. I.C. Engines: Air-standard Otto, Diesel and dual cycles.
  6. Refrigeration and air-conditioning: Vapour and gas refrigeration and heat pumpcycles; basic psychrometric processes.
  7. Turbomachinery: Impulse and reaction principles, velocity diagrams, Pelton-wheel, Francis and Kaplan turbines.
Section III: Materials, Manufacturing and Industrial Engineering
  1. Engineering Materials: Structure and properties of engineering materials, phase diagrams, heat treatment, stress-strain diagrams for engineering materials.
  2. Casting, Forming and Joining Processes: Different types of castings, design of patterns, moulds and cores; solidification and cooling; riser and gating design. Plastic deformation and yield criteria; fundamentals of hot and cold working processes; load estimation for bulk metal forming processes such as forging, rolling, extrusion, drawing; and sheet metal forming processes such as shearing, deep drawing, bending; principles of powder metallurgy. Principles of welding, brazing, soldering and adhesive bonding.
  3. Machining and Machine Tool Operations: Mechanics of machining; basic machine tools; single and multi-point cutting tools, tool geometry and materials, tool life and wear; economics of machining; principles of non-traditional machining processes; principles of work holding, design of jigs and fixtures.
  4. Metrology and Inspection: Limits, fits and tolerances; linear and angular measurements; comparators; gauge design; interferometry; form and surface finish measurement; machine tool; alignment and testing methods; tolerance analysis in manufacturing and assembly.
  5. Computer Integrated Manufacturing: Basic concepts of CAD/CAM and their integration tools.
  6. Production Planning and Control: Forecasting models, aggregate production planning, scheduling, materials requirement planning.
  7. Inventory Control: Deterministic models; safety stock inventory control systems.
  8. Operations Research: Linear programming, simplex method transportation, assignment, network flow models, simple queuing models, PERT and CPM
PAPER-II: CIVIL ENGINEERING (DEGREE LEVEL)
1. Building Materials And Construction:
Bricks– Types of Bricks, Indian standard classification, properties; Stones – Types of stones, classification, properties, dressing and polishing of stones; Methods of Quarrying; Cement – Different grades and types of cement, properties and IS specifications; Aggregates – coarse and fine aggregate, properties and IS specifications; Cement Mortar –Proportions of cement mortar for various applications; Concrete –Constituents of Concrete, Different grades of Concrete, mix proportioning using IS Code, Properties of fresh and hardened Concrete; Admixtures – Types of Admixtures.
2. Strength of Materials And Theory of Structures:
Strength of Materials: Simple stresses and strains, elastic constants and relationship between them; Compound bars; Temperature stresses; Shear forces and bending moment diagrams for beams; Principal stresses and Mohr’s circle of stress, Theory of bending and bendingstresses; Shear stress distribution; Theory of torsion; Springs; Deflections of beams; Thin and thick cylinders;; Analysis of trusses, Betti-Maxwell theorem; Shear centre and unsymmetrical bending.
Theory of Structures: Direct and bending stresses; Columns and struts; Strain energy method; Moving loads and influence lines; Arches and suspension bridges; Static and kinematic indeterminacy; Moment distribution, Slope deflection, and Kani’s methods applied to continuous beams and portal frames; Column analogy and matrix methods of analysis.
3. RCC and Steel Structures:
Concrete Structures: Materials, permissible stresses and IS Specifications; Working stress methods; Limit State Method – Stress Blocks parameters, design of Beams, Slabs, Columns and Footing; Design for Shear and Torsion; Design of Retaining Walls, Water tanks, and T-Beam Slab bridges; Yield line theory.
Steel Structures: Properties of steel sections, permissible stresses, IS Specifications; Riveted and welded joints and connections; Design of simple and compound Beams and Columns, Column bases, Roof trusses, Plate and Gantry Girders; Plate Girder Lattice Girder Railway bridges, and Bearings. Plastic analysis.
Pre-Stressed Concrete: Basic concepts, material for pre-stressing, losses in Pre-stress, classification of pre-stressing system; Analysis of PSC Sections.
4. Fluid Mechanics and Hydraulics:
Fluid Properties; Measurement of Pressure – Manometers; Fluid Kinematics –Classification of Fluids, Stream function and Velocity potential, significance and use of Flow nets, Fluid dynamics – Continuity equation, Bernoulli’s equations and Impulse momentum equation; Laminar and Turbulent flow through pipes – significance of Reynolds number, Hagen – Poiseuille’s equation, Darcy – Weisbach equation, Friction factor, Water hammer phenomenon; Compressible flow– Bernoulli’s equation for Isothermal and Adiabatic conditions, Mach Number, Mach cone, stagnation properties; Steady uniform flow through open channels; Gradually varied flows – significance of Froude number, classification and computation of Flow profiles, Hydraulic jump, Surges; Boundary layer – Laminar and Turbulent Boundary layer, Boundary layer thickness, rough and smooth Boundaries, Boundary layer separation; Dimensional analysis and similarity laws; Hydraulic Turbines – classification, Velocity triangles, principles and design of reaction and impulse turbines; Centrifugal pumps – specific speed, work done and efficiency, characteristic curves.
5. Hydrology and Water Resources Engineering:
Hydrological cycle; Rainfall – types and measurement, network design; Infiltration – ะค-index; Runoff – process, factors and determination of runoff, dependable yield; Floods –flood hydrograph, computation of flood peak using rational formula, unit hydrograph method and Gumbel’s extreme value methods; Groundwater – types of aquifer and properties, Darcy’s law, specific yield, steady radial flow to wells in confined and unconfined aquifers; Irrigation – types and advantages, soil water plant relationship, consumptive use, duty, delta, base period, crops and their water requirements; Single and multipurpose projects; Dams – classification, forces and design of Gravity dam and Earth dam; Spillways – types, energy dissipation, stilling basin, Appurtenances; Canals –alignment, Kennedy’s and Lacey’s theories, lining of Canals; Weirs – components, design of vertical drop and sloping glacis weir; Seepage forces – Bligh’s Theory, Khosla’s theory; Canal falls – types and design principles; Cross drainage works –classification and design principles of aqueducts; Hydropower – classification and principle components of Hydroelectric power plants.
6. Environmental Engineering:
Water supply – objectives, rate of demand, population forecasts; Analysis of water classification, design of coagulation, sedimentation, filtration, disinfection and softening processes; Methods of layout of distribution pipes– Hardy cross method; Waste water engineering – systems of sewerage, hydraulic formulae and design of sewers, BOD, COD, self purification of natural streams, methods of sewage disposal; Treatment of sewage –principles and design of grit chamber, sedimentation tanks, trickling filters, activated sludge process, sludge digestion tanks, septic tanks; Municipal solid waste characteristics, collection and transportation of solid wastes; Air Pollution types and sources of pollutants, air quality standards; Noise pollution – Impacts and permissible limits, measurement and control of noise pollution.
7. Transportation Engineering:
Highway Classification as per IRC; Highway alignment; Engineering Surveys; Geometric Design; Cross sectional elements of road; Gradient; Grade compensation; Traffic Surveys–speed, Volumes, origin and destination; Highway capacity and level of service as per HCM 2000; Intersection – at grade and grade separated; Channelization; Rotary intersection; signal design – web star method, traffic signs, pavement marking; Parking studies, accidental studies, pavement types, Factors considered for pavement design, flexible and rigid pavements design concepts.
Railway Engineering: Permanent way, rails, sleepers, ballast; Creep, coning of wheel, rail fixtures and fastenings, super elevation, cant deficiency, curves, turnout; Points and crossings.
Airport Engineering: Selection of site of Airport, runway orientation and design, wind rose diagram, basic run way length, correction to basic runway length.
8. Soil Mechanics and Foundation Engineering:
Soil Mechanics: Physical properties of soils, Classification and identification, Permeability, Capillarity, Seepage, Compaction, Consolidation, Shear Strength, Earth pressure, Slope stability;
Foundation Engineering: Site investigations, stress distribution in soils, Bearing capacity, Settlement analysis, Types of Foundation, Pile foundations, Foundations on expansive soils; swelling and its preventions; Coffer dams, Caissons, Dewatering, Bracing for excavations, New mark charts, machine foundations.
Engineering Geology: Mineralogy, Structural Geology, Groundwater Exploration methods; Engineering Geology applications for Tunnels, Dams and Reservoirs; Geological hazards and preventive measures.
9. Estimation, Costing and Construction Management:
Abstract estimate: Detailed estimate – centerline, long & short wall method, various items of Civil Engineering works as per Indian Standard, General Specifications –Earth Work, Brick/ Stone Masonry in Cement Mortar, RCC, Plastering in Cement Mortar, Floor finishes, white wash, color wash; Standard schedule of rates, lead and lift, preparation of lead statement; Computation of earth work – Mid-ordinate, Mean Sectional area, Trapezoidal method, Prismoidal Rule; Approximate estimate – Plinth area and cubic rate estimate.
10. Surveying:
Principle and classification of surveying, chain surveying; Compass surveying; Leveling and contouring; Theodolite surveying; curves; Introduction and Fundamental concepts of electronic measuring instruments – EDM, Total station, GIS & GPS.
For more Information please visit – http://www.tspsc.gov.in

Share

& Comment

0 comments:

Post a Comment

 

Copyright © 2015 e Govt Job Alert 2016 - 2017 : Recruitment, Results, Answer Key, Exam Syllabus™ is a registered trademark.

Designed by Templateism. Hosted on Blogger Platform.